Quantcast
Channel: Der Alte Fritz Journal
Viewing all 1266 articles
Browse latest View live

GNW Swedes from Warfare Miniatures

$
0
0
Two regiments of 30 Warfare Miniatures Swedes for the Great Northern War

I received some reinforcements for my GNW Swedish army from Warfare Miniatures the other day, and now I have enough figures to create two 30-figure battalions as shown in these pictures.

Since many of the figures are charging with levelled or extended muskets/bayonets, I chose a deeper base to place them on so that the bayonets do not get broken or bent from use. This also provides enough extra space to create a perception of a third rank by offsetting some of the command figures, such as the drummers, officers, NCOs and standard bearers behind the first two ranks.

For now, I am basing the figures as follows: 2 stands of 6-figures, 2 stands of 5-figures and one command stand with 8-figures. The command stand will include 6 pikemen and 2 standard bearers.

So, what do you think so far?
Side view of the regiments, showing the formation of a third rank with supernumeraries such as officers, drummers and standard bearers.

Assembling the Swedes

$
0
0


Warfare Miniatures GNW Swedes after assembly process.




I assembled 78 Warfare Miniatures GNW Swedes yesterday. Each figure requires a modest amount of assembly, either gluing on a sword & bayonet scabbard or a pole arm or pike. The marching figures' left arm has to be glued onto the torso as well. My plan was to assemble two 30-figure regiments but I had a few marching poses left over so I decided to assemble them as well.

After a little bit of trial and error, I realized that I needed to break out my epoxy putty so that I could stick a tiny bit of green stuff into the cavities for the pegs that hold the scabbard to the torso. I tried a couple figures without the putty and it was difficult getting the metal to metal bond to hold, as the join was a little awkward to me. Putty definitely speeds up the bonding and assembling process, so I would recommend using it for these figures. Then it took me several models before  realizing that one needs to clip off the bayonet flange that sticks out of the combination sword and bayonet frog. Why? Because the bayonet is already cast to the musket and so the little piece of bayonet that sticks out of the scabbord is a duplicate or redundant. So I took a pair of scissors and just snipped off the little piece of metal. That was easy enough, it just took me several figures before I figured it out.

Front view of two regiments plus a partial regiment of 12 figures marching in the third row.
All in all, assembling is an easy, but somewhat tedious project, for these figures but it is something that you need to do. It doesn't dissuade me from buying more figures, but it did take me a couple of hours to do this mass of figures. Tonight, I will give them a quick soaking in rubbing alchohol to remove any mould-removal agent on the metal. Then I will glue the figures to a square of cardboard and once the glue dries, prime the figures with grey primer. I hope to be able to paint some samples over the weekend.

I now have two charging regiments of Swedes and enough leftover marching poses (which I did not use in the two regiments) - 12, to start a third regiment of 30 figures.

The Great Northern War in Europe 1700-1721 Map

$
0
0
Not the map, but a bunch of angry Swedes on the attack.


I found this nice map of Europe at the time of the Great Northern War. Click on the link below to see the full size version.

The Great Northern War in Europe 1700-1721 - Full size


On the painting front, I have completed 12 of the 30 figures for the Upplands Regiment.

Upplands Regiment WIP

$
0
0
Warfare Miniatures - Upplands Regiment


Here is a quick picture that I took this morning showing the first dozen Warfare Miniatures GNW Swedes that I have painted so far. I selected various regiments from the Poltava order of battle disclosed in the Osprey Campaign book on Poltava. I would imagine that a lot of other collectors use the same methodology- organizing around Poltava.

The figures are informally placed on their 60mm by 80mm stands to give an impression of how they might look when based.

The photo is uploaded from my iPad and for some reason, Blogger will let you edit your pix in any manner possible (save for improving the focus), but it will not upload pix that you can click and enlarge. However, if I email the pix to myself and download them into my desktop computer and then upload them into my blog, then the pix magically enlarge. Blogger, how stupid can you be; why don't you fix this feature in your software? Blogger wins my Stupid Company of the Year Award.

At any rate, I will fix the pictures this evening after I get home from work and add some better posed shots.

Upplands Regiment Completed

$
0
0

Upplands Regiment - Warfare Miniatures (click to enlarge)

I finished the Upplands Regiment today, using the Warfare Miniatures Great Northern War ("GNW") figure range and flag sheets. I also completed the first stage of the basing process: troweling on the spackle compound and dipping it into a box of fine railroad ballast. Once the stands have dried, the next step will be to ink the bases and then add flock and tufts.


Ground level view of the Upplands Regiment. Flags are also from Warfare Miniatures.

Along the way, I decided to increase the unit size from 30 to 32 figures, using the following basing convention:

4 stands of 6 musketeers
1 stand of 8 figures (6 x pikemen and 2 color bearers)

The original idea was to have a 30 figure regiment (2 x 6-figures; 2 x 5-figures, and 1 x 8 figures), but my sense of symetry compelled me to increase the regiment by 2 figures so that all of the non-pike/command stands would have the same number of figures.

Rear view showing the third rank of supernumeraries.
The illusion of a third rank is attained by just placing a few supernumeraries  behind the regiment acting as file closers. It gives the illusion of having a 3-ranks formation.


A side view providing a different angle of the faux third rank, using just a few command figures to sugges a  third rank.

I use 60mm wide by 80mm deep wooden bases (MDF). The extra depth is needed so that the charging figures can be set back into the stand to minimize breakage. It also provides enough spacing to add a third row of soldiers.


Ostgotland Regiment WIP

$
0
0

Ostgotland Regiment at Poltava. Click to enlarge.

I finished painting the Ostgotland regiment for the Swedish Army at Poltava in 1708: 32 figures using Warfare Miniatures. As you can see, I still have to terrain the bases and add the colours, but the painting is completed.


Front view
This regiment incorporates the more aggressive "action" or attacking figures in the Warfare Miniatures range. With all of those levelled bayonets, one needs a deep base. I use 60mm frontage and 80mm depth, which provides adequate room to place three ranks and still have room for the bayonets, so that they don't break off from wear and tear during a game.

Side view showing the "virtual third rank" of supernumeraries.
The regiment includes four stands with six figures and one central command stand with six pikemen and two standard bearers. Note the grenadiers on the righthand base in the picture below.


View of the full regiment from the front. Two partial battalions of 18 figures are shown in the background.

I have two partial 18-figure battalions ready for primer, but I need to order more figures to boost them up to 32 figures. While I wait for delivery of the next order, I will probably start on the 18 Swedish cavalry that I have on hand. My cavalry regiments will have 36 figures in three squadrons of 12 figures.


N

GNW Swedish Brigade

$
0
0

Ostgotland (front) and Upplands (rear) regiments . Click to enlarge.


I have now completed the first two regiments of my Great Northern War ("GNW") Project - Upplands  and Ostgotland are now ready to serve Charles XII of Sweden.

All Swedish battalions will have 32 figures on five bases: 6/6/8/6/6 with the command stand having eight figures - six pikemen and two colour bearers. I include one command figure set behind the two ranks of infantry on each stand. This represents the officers and file closers who operated behind the infantry line and it also gives the illusion of there being a third row of figures on the stands.

Side view depicting the "third row".

Ostgotland (left) and Upplands (right)
I finished the Upplands regiment bases this evening by applying a mix of Winter and Highland tufts plus light green Winter Grass static grass on each base. I wanted the grass colors to be pale and washed out to depict type of terrain that one might see in the Fall and early Winter. Once the Ostgotland bases dry, I will dry brush the grit with a tan color and then add the tufts and static grass.


I am running out of Warfare Miniatures castings to paint, so I will have to wait for the quartermaster to place his requisition for more figures. In the meantime, I have 18 Swedish cavalry figures that I can start working on.

Ostgotland Kavalrie Regiment - GNW

$
0
0


Warfare Minitures GNW Swedish Kavalrie Regiment Ostgotland. (click all pix to enlarge)
Same regiment, but this time depicting a separate Kavalrie commander.


I completed the first 10 of the 18 figures that will comprise my first GNW Swedish cavalry unit, the Ostgotland Kavalrie Regiment in service in the King's Army at Poltava. The figures are from the Warfare Miniatures Great Northern War range of 28mm figures.

The Swedish army had regiments of Kavalrie and regiments of Dragoons. Following normal European conventions of the times, I take that to mean that the Kavalrie are considered to be heavier battlefield horse whereas the Dragoons are one notch lower on the quality ladder. The uniforms of both appear to be exactly the same.

My GNW Swedish cavalry (generic term cavalry, to indicate anyone on a horse) will be organized into three squadrons of 12 figures for a regimental total of 36 figures. At a 1:20 figure to man ratio, that yields a field strength of 720 riders. The established or paper strength of the cavalry regiments were around 1,000 but I figure that attrition would result in a lower number of riders on campaign.

My brief understanding of Swedish cavalry tactics is that the Swedes loved to charge and they did it in some sort of a wedge shaped formation. I have to do some experimenting with basing to come up with a basing format that I like. For the time being, though, I am using a 60mm wide by 80mm deep base, same as the infantry stands, for the cavalry. I could turn the bases onto the long edge so that the 80mm side is the frontage of the unit. I haven't decide on this yet.

One advantage of the 60mm frontage is that cavalry units would have the same stand frontage as the infantry units.

Note to Dannie Fogleman: what size bases are you using for your Beneath the Lily Banner rules?


A squadron in the Swedish "wedge formation".

Same as previous picture above.

Formed in a more traditional wargaming line.
After working on two Warfare Swedish infantry units, I have a better understanding of how to assemble the figures and get them into the priming booth quickly. The cavalry figures require gluing on the right arm and the sword scabbard as well as the usual attachment of the rider to the horse. I use a little bit of green epoxy putty for the assembly, placing a small dab of putty into the socket holes that the figures provide for the arm and scabbard attachments. These are nicely deep so that you can easily locate the part into the hole. The putty creates a stronger bond and I recommend combining green putty with super glue for the assembly. I then use white Elmer's Glue to attach the figures to temporary cardboard bases and then prime them with grey primer. I seem to have moved away from the black primer system, just because, well just because.

The painting of the figures is relatively easy. They are not loaded down with equipment so there are fewer things to paint. For whatever reason though, the Warfare figures seem to paint rather quickly and are fun to paint.

It appears that the range does not yet have dedicated command figures for the cavalry (officers, standard bearers, and musicians) so these are provided by other generic figures wearing tricorn hats. The officers and standard bearer wear a cuirasse plate under the coat and have a large sash around the waist. I don't believe that the Swedish army used cloth waist sashes during the GNW so you kind of have to live with this error. The sashes can not be carved off of the figure, and in any event, it would be too much work and not worth the payback in time. Thus, I elected to paint the sashes yellow since this seems to be a predominate  color in the Swedish Army of the GNW. The figures look fine even with the sashes. I assume that at some point in the near future, the Warfare sculptor, "Clibinarium" will add the command figures to the Swedish army.

I will also need an infantry brigade commander and I think that the one depicted two pictures above (see wedge formation pix) on the round stand will work just fine as a general officers for my Swedes. Again, I expect that the range will add the extra command figures in the near future. Warfare will be releasing the first of its Russian GNW infantry by the end of September or early October 2015, so I am looking forward to giving some of my Reaper Paints "Elven Green" paint a workout.

Finally, I just really like the animation that the Warfare Miniatures cavalry figures have and that is one of the things that attracted me to both the period and the figure range.






Ostgotland Kavalrie Regt. Completed

$
0
0


Ostgotland Kavalrie Regiment - click pix to enlarge.

So here I am serving up a double wedgie of Swedish cavalry for the Great Northern War (GNW) using Warfare Miniatures Swedish cavalry figures, in 28mm. As the Russian troops might say, "ouch!"

I have finished painting the first 18 Swedish Kavalrie that I recently purchased from Warfare Miniatures, adding them to the two infantry units that I painted over the past several weeks. I am trying to pace myself by only ordering figures that I can paint in a reasonable time period; once they are completed then I can order more figures. This is opposed to my normal method of just buying an insane amount of figures for the whole project and then only painting a fraction of what I have ordered.

The cavalry regiment depicted in these pictures is the Ostgotland Kavalrie Regiment at Poltava. My eventual organization will likely be two 18-figure squadrons in one 36-figure cavalry regiment. So really what you see in these pictures is only one squadron. Swedish cavalry regiments had two squadrons, apparently.

I am still experimenting with the basing, but I think that I like placing three figures on a 60mm by 80mm base, with one figure in front and two figure in a second rank. So when I clump three or more stands together, I get a wedge formation per Swedish tactical doctrine in the GNW.


Frontal view of two squadrons



A view of the proposed basing scheme, with three figures on a 60mm by 80mm deep stand, with the figures attached to the stand in a triangle shape. When several stands are placed together, they yield the visual of a wedge formation that the Swedish cavalry employed in their tactics.



A ground level view of the regiment.

I have now run through all of my Warfare Miniatures Swedes, so more are on order. While I await the delivery, I will turn back to painting Minden SYW Prussians and maybe start some Saxon cavalry at Kolin, using Austrian or Prussian castings.

Saxon Flags of the SYW

$
0
0

Saxon Infantry Flags painted by Mark Allen (click to enlarge)

I recently commissioned 4 sets of flags from Mark Allen for my nascent SYW Saxon project. Mark had previously painted a set of Saxon Leib-Grenadier-Garde regiment flags for me ( a set being comprised of the white Leibfahne and the colored Ordinarefahne). Mark is the gentleman who paints all of the flags that John Ray uses in his 28mm SYW armies, as seen in his book, "A Military Gentleman".

From left to right, starting with the top row: von Bruhl or Rochow regiment leibfahne and ordinarefahne; the Lubrinsky regiment leibfahne and ordinarefahne;

Bottom row, left to right: Prinz Maximilian leibfahne and ordinarefahne; and the Prinz Clemenz leibfahne and ordinarefahn.

In for a penny, in for a pound, I might as well add another brigade of four regiments to give me a total of 8 infantry regiments. For the cavalry, I will paint the three Saxon chive-leger regiments that escaped capture at Pirna with the rest of the Saxon army in 1756. The Prinz Albrecht, Prinz Clemenz and Graf Bruhl regiments had the good fortune to be stationed in Poland at the outbreak of the SYW, thus escaping the capitulation at Pirna.

I plan to use Minden Prussian musketeers with Swedish cuffs for the Saxon infantry and the Prussian dragoons for the Saxon Cheveau-leger cavalry regiments.

Minden Saxon Cavalry

$
0
0


Minden Prussian Dragoons painted as Saxon Cheveaulegers

My goal is to paint enough Austrian and Prussian forces, including units already painted, to host a Battle of Kolin game at the next Seven Years War Association convention on March 30, 31 and April 1st in South Bend, Indiana. Christopher Dufffy will be the guest once again and he plans on giving a talk about the Battle of Kolin. So you can see how my mind is at work on this one.

The Austrian army at Kolin had a contingent of Saxon Cheveauleger cavalry (basically they are dragoons) posted in reserve on the right flank behind the Oak Wood. So I decided that I would need to have several Saxon units to play this role in the game.

After taking a look at the information on the Saxons at the Kronoskaf web site, I decided that the Minden Prussian Dragoons would be acceptable stand ins for Saxon cavalry. With this in mind, I painted three test figures to represent the Prinz Karl, Prinz Albrecht and Graf Bruhl cheveauleger regiments at Kolin.

Here is a picture drawn by Knotel:



Here are some close up pictures of the individual cavalry figures. I always paint one sample figure of any new unit before painting the whole regiment. I like the way that these Minden Saxons are turning out.

Prinz Karl Cheveauleger

Prinz Albrecht Cheveauleger
Graf Bruhl Cheveauleger
d

Minden Saxon Cavalry Pix

$
0
0

Saxon regiment Prinz Karl Cheveaulegers (CL2) - click to enlarge the view.

This evening I completed the first of two squadrons that I plan to paint of the Prinz Karl Cheveauleger cavalry regiment in the Saxon army of the SYW. I used Minden Miniatures Prussian dragoons for the Saxons. I usually have two 12-figure squadrons comprising a cavalry regiment in my  organization, or 24 figures to a regiment. Some day I might up the total to three squadrons of 12-figures, or 36 figures. For now though, 24 figures is enough for me.


I decided to freehand paint the leibfahne colour for the regiment. I usually use a GMB Designs flag, but they do not make Saxon flags at the moment. Maverick Miniatures in the UK has Saxon flags and will size them for you to fit with any size of wargame figure. I used Dr. Stephen Summerfield's book on the Saxon army for my source of flag information and the Kronoskaf website for the uniform information.


Ground level view of the squadron with a good view of the flag.


The Graf Bruhl cheveaulegers are next on my painting table and I should have a squadron of them completed later this week.

Graf Bruhl Cheveaulegers

$
0
0

Saxon cheveauleger regiments Graf Bruhl (blue facings in foreground) and Prinz Albrecht (green facings in background). click all images to enlarge the view

Prinz Albrecht leibfahnen

Graf Bruhl ordinarefahnen.


t

Saxons Are Based Pix

$
0
0

Prinz Albrecht (left) and Graf Bruhl (right). click on all pictures to enlarge view.

Better view of the Graf Bruhl flag

Front view without the officer. All figures are Minden Prussians

Here they are with the basing completed.

GNW Swedish Cavalry Pix

$
0
0




I finished off the basing and flagging of the Ostgota Kavalrie Regiment for my GNW Swedish army last evening. Both the figures and the flags are from Warfare Miniatures and their Great Northern War range of figures.

I used Citadel Scorched Grass static grass and The Army Painter tufts (Highland, Wasteland and Winter) on the bases. The ground was made using spackle compound, slathered over the base, and then dipped in a tub of fine railroad ballast. Once dry, I drybrush some light tan on the ballast before adding the tufts and the static grass. I use mostly the Highland tufts, which offset the static grass color nicely. The Wasteland tufts are dark green and provide some contrast. The Winter tufts are too light in color so I don't use much of those.


Warfare Miniatures figures and flags. 


Swedish Ostgota Regiment - Warfare Miniatures figures and flags.

Reinforcements have been ordered and are now making their way across the Pond.

I Think I Need More Prussian Cavalry

$
0
0
My Minden Prussian Cuirassier Brigade (KR13 - Garde du Corps in front; KR1 Jung Krakow in the middle; and KR8 von Seydlitz in the back. (click pix to enlarge).

Last evening I was looking at my Austrian and Prussian armies, which are facing each other across my game table, and I realized that with the recent addition of some Saxon cavalry, my Prussians are going to be outnumbered. 

We we can't have that.  8-|

As of today, the Austrians have 3 Cuirassier regiments, 2 dragoon regiments, the equivalent of 1 converged Saxon cheveaulegers painted and based. My nephew Alex has just completed a commission for me that will add one more Cuirassier and one more dragoon regiment to the order of battle. I also have one more Cuirassier regiment coming via some bartering with another painter. So at the end of the day, the Austrians and allies have a combined 5 Cuirassier, 3 Dragoons and 1 Cheveauleger regiment, or 9 regiments.

My Minden Prussians currently have 2.5 Cuirassier regiments, 2 dragoon regiments, and 1 hussar regiment, or 5.5 regiments ( Garde du Corps counts as a half regiment). Regiments already painted:


My Minden Prussian Cuirassier, annotated in the picture. (click to enlarge)


KR1 Jung Krakow cuirassiers (24 figures)
KR8 von Seydlitz cuirassiers (24)
KR13  Garde du Corps (16)
DR5  Bayreuth Dragoons (48) - this was a 10-squadron regiment. I count this as two dragoon regiments.
HR5  von Reusch (Black Hussars) Hussars (32)

Clearly it is time to start painting Prussian Cuirassiers again. :D

I think  that I will start with the yellow coated KR2 Prinz von Preussen regiment. The Gensdarmes regiment - KR10 - was usually brigaded with KR13 Garde du Corps, and since I already have the latter regiment, then KR10 would be a logical addition as well.

This morning I cleaned and primed the first dozen Cuirassiers for the Prinz von Preussen regiment. I think that every collection of SYW Prussians probably includes this regiment because of their distinctive yellow coats. With a long three day weekend ahead of me, I ought to be able to make good progress on the painting front, so be sure to check back here over the weekend for painting updates.

IR22 Prinz Moritz Regiment Completed

$
0
0

IR22 Prinz Moritz of Anhalt Dessau shown with his regiment. Click to enlarge.
 Here are pictures of IR22 Prinz Moritz regiment in the Prussian army of the SYW. The complete regiment enters service in my army today, October 19, 2015. I now keep an army log for my SYW armies that includes a picture of the regiment and its flags, date of service, and eventually, a battle history.

The regiment's inhaber was always a prince from the Anhalt Dessau family, going back to Prince Leopold, "the Old Dessauer". Prinz Moritz was one of his sons ( he might have been the one son that was the subject of an experiment conducted by Leopoldo - he received no education because Leopold wanted to see how much he could learn on his own, without the aid of any teachers).

Coincidentally, the Minden range added a Prinz Moritz personality figure and you can see him on the round stand in front of the regiment. He is wearing his orange Order of the Eagle Sash across his left shoulder.

The figures are the Prussian infantry with the tighter Prussian cuffs (MP-001 and MP-002) and this is the first time that I have used the Prudent cuff figures in my Minden Prussian army. When Frank Hammond produced the original Prussian figures, they only came with the larger Swedish cuffs.

The flags are from GMB Designs, as is customary with me.

If you scroll to the bottom of the page you will see a teaser photo of the first squadron of the CR2 Prinz von Preussen Cuirassier regiment. I will start painting the second 12-figure squadron this week. I'm awaiting flags from GMB to complete the presentation of the regiment's colours.


IR22

IR22

CR2 Prinz von Preussen cuirassier regiment. First squadron.




d

Jonkopings Regiment in the GNW

$
0
0
54mm Swedish Infantry Figure (not a Warfare Miniatures figure) posted to show an example of the karpus hat.


I received some more metal reinforcements from Warfare Miniatures last week, enough to paint a Swedish regiment wearing the karpus headgear and probably another karpus and a tricorn battalion plus 18 more cavalry.



So last evening I broke out the figures and assembled 32 infantry in karpus for the Jonkopings regiment. This unit has red facings, waistcoat, breeches and karpus brim, so it should add a bit of color and variety to my growing GNW Swedish army.

The Warfare figures require a modest amount of assemble before priming. In this case, I only had to attach scabbards to the rank and file, a few pikes, and some pole arms for the officers. I've gotten to be an old hand at this by now, so it is a simple matter of kneading some green epoxy putty together and inserting a tiny ball of putty into the hole that places the scabbard in place, followed by a dab of glue and then presto bingo they are done.

Tonight I will glue the figures to temporary card bases that hold the figure whilst painting. That will be followed by a coating of grey primer and then I will have a battalion set aside and ready for painting when the mood and my painting schedule allow. I want to finish 12 more Minden Prussian Cuirassiers before switching back to GNW Swedes. I like the variety of going back and forth between the two periods and two different styles of miniatures. I might also assemble 18 more Swedish cavalry to bring the Ostgotland Kavalrie regiment up to its full complement of 36 horse and riders. Since a Swedish army can have as much as 50% cavalry, I need to get ahead of the cavalry painting before I get too far along with the infantry.

Christmas Pix Photo Session

$
0
0

Lady Emma Cuddlestone-Smythe and Tiberius the Wonder Dog.
We received some of the proofs of a series of pictures that we had taken of the Princess and I just wanted to post two of my favorites on my blog. The first one shows our hound in what I call "Classic Golden Retriever Pose" smiling right into the camera with tongue hanging out. In the second picture below, Tiberius decides to ham it up a little bit lay a smooch on Lady EC-S's cheek.


A Dog's Work Is Never Done
These pictures will undoubtedly find their way onto Facebook in the near future.

Cheers,

Fritz

Narke-Varmland Regiment- GNW Swedes

$
0
0
Narke-Varmlands regiment with Warfare Miniatures figures. Click all pix to enlarge the view.


I completed 24 of the 32 figures for the Narke-Varmland regiment for my Swedish Great Northern War (GNW) army. The figures are from Warfare Miniatures as are the flags. This is my first regiment using the figures wearing the karpus hat or cap with the colored brim. The regiment also has distinctive  red stockings and facing colors rather than the traditional Swedish yellow. I will probably paint the Jonskopings regiment next because it also has red facings and stockings (but wears a tricorn). This way, I will have a "yellow brigade" and a "red brigade", each of two regiments.

I still have one more stand of six figures to paint in order to finish the regiment. However, 24 figures gives you a good idea of how the final regiment will look upon completion.

Warfare Miniatures announced yesterday that its first GNW Russian figures will be arriving this week! I am really looking foreward to order 4 regiments worth of the Russians and getting that army started. Of course, I will need twice as many Russians as Swedes, so there is a lot of painting still to come.


Russian Update: Warfare Miniatures is now selling the first five packs of GNW Russian infantry on its web site. I bought enough to start on 3 x 32 figure Russian battalions of musketeers.


Warfare Miniatures Blog


Rear view showing the offset of one command figure on each base to give the illusion of a third rank.





View of the command stand: 6 pike and 2 standard bearers.


View of the flags made by Warfare Miniatures








Viewing all 1266 articles
Browse latest View live